- Addition, subtraction: POINT UNDER POINT, places filled with free zeros — never right-aligned.
- Multiplication: compute WITHOUT points, then restore as many decimals as both factors carry.
- Multiplying by less than 1 SHRINKS: ×0.5 = half, ×0.25 = a quarter — and rightly so.
Adding and Subtracting: Alignment First
Setting up an addition or subtraction of decimals is first a matter of LAYOUT: the decimal points LINE UP vertically — and with them, every place (units under units, tenths under tenths). 13.7 + 2.45 is set up as 13.70 over 2.45 (the free trailing zero fills the missing place), and the addition rolls like whole numbers: 16.15. The point of the result drops STRAIGHT DOWN the point column. Same rule for subtraction: 8.3 − 1.75 becomes 8.30 − 1.75 = 6.55 — without the equalizing zero, borrowing from an empty place derails the carry. This extends the place-value lesson directly: only same-name places add up, exactly as only same-size parts added up with fractions — one family of rules, alignment as the gesture.
Multiplication: Count the Decimals
| The Operation | The Rule | The Example | The Check |
|---|---|---|---|
| Addition, subtraction | Points aligned, places filled with zeros | 13.70 + 2.45 = 16.15 | Order of magnitude: 14 + 2 is about 16 ✓ |
| Multiplication: the sum | Multiply WITHOUT the points | 2.3 × 1.4: first 23 × 14 = 322 | Like whole numbers, serenely |
| Multiplication: the point | As many decimals in the result as in BOTH factors | 1 + 1 = 2 decimals: 3.22 | Estimate: 2 × 1.5 = about 3 ✓ |
| Times 0.5 / 0.25 | Half / quarter | 46 × 0.5 = 23 | Multiplying can SHRINK: below 1, it reduces |
| By 10, 100, 1000 | The point travels right | 4.25 × 100 = 425 | The digits never move |
| Systematic estimating | Round BEFORE setting up | 19.8 × 3.1: about 20 × 3 = 60 | Anything far from 60 is suspect on arrival |
13.7 + 2.45 = ?
Aligning the points puts each place in its slot: 70 hundredths + 45 hundredths = 115 → carry. The 13.945 aligned the numbers to the RIGHT like whole numbers: one number's tenths fell on the other's hundredths — the classic alignment fault.
Estimation, the Permanent Bodyguard
Before setting up, ROUND and predict: 19.8 × 3.1 is about 20 × 3 = 60 — if the written computation delivers 613.8 or 6.138, the point slipped and the estimate shouts it. This order-of-magnitude reflex is quality control for every decimal operation: two seconds of mental maths, and point errors — the most frequent AND the biggest — no longer pass.Multiplication in two stages: 2.3 × 1.4 — FORGET the points (23 × 14 = 322), then RESTORE them: one decimal in 2.3, one in 1.4, so TWO in the result: 3.22. Behind the scenes: 2.3 is 23 tenths, 1.4 is 14 tenths — tenths times tenths make hundredths: the decimals add up because the places multiply.
The Right-Alignment Trap — and "Multiplying Enlarges"

2.5 × 0.4 = ?
Without points: 100. Two decimals to restore (one per factor): 1.00 = 1. The estimate agrees: 0.4 is a bit less than half — half of 2.5 is 1.25, expect slightly less: 1 ✓. Multiplying by less than 1 shrinks, in full legality.
Case File: The Steward's Accounts










- Addition, subtraction: POINT UNDER POINT, places filled with free zeros — never right-aligned.
- Multiplication: compute WITHOUT points, then restore as many decimals as both factors carry.
- Multiplying by less than 1 SHRINKS: ×0.5 = half, ×0.25 = a quarter — and rightly so.
- Estimate BEFORE setting up (round, predict): the bodyguard against slipping points.
- By 10, 100, 1000: the point travels — the digits never move.



